I have always wanted to tackle that elusive Dresden Fan quilts from days gone by. Then I saw this quilt on Pinterest and then this quilt on Pinterest. I knew that I wanted to make the Dresden with the stripes and movement that both of the quilts have. How amazing would ombre dots look in a Dresden Fan? I can’t wait to find out… Maybe Vanessa of V and Co or Moda will send me some fabric for a sample 
Oh to dream big and shameless all the same!
So ultimately, I would rather spend money on fabric than notions, so I chose to use the 15 degree mark on my ruler to make my fan blades. There are lots of tutorials to make dresdens. I really like this one, but I don’t have the EZ Dresden ruler. So I am going to show how I made the dresdens without the Dresden ruler. If you have a Dresden ruler, by all means, keep your life simple and use it. Cut all the fan blades to the 6.5″ mark.
I started with a strip of Kona white fabric 6.5″ wide, and line up the 15 degree mark on my 6″x24″ ruler with the edge. To be honest, I held my breath and cut. Low and behold, it worked, so I added little post-its to help line up the top and bottom edges. Continue to flip the ruler back and forth until you have 48 blades cut, enough for 2 blocks.
I cut strips of fabric from two coordinating golds and a Kona Coal. Kona Coal is my new go-to dark. I love the simplicity that the deep grey adds. This is also a fat quarter friendly block! I love that!
Cut fabrics:
-
4″ x 22″ medium print
- 4″ x 22″ dark print
- 1″ x 22″ very dark solid
- 2.5″ x 22″ white
- 6.5″ x 22″ white
I really like the medium/dark or light/medium color combinations from the same color!
The medium strip of fabrics are a Michael Miller Sunny Ta Dot, Kona Coal, and Kona White.
The dark strip of fabrics are Heather Ross Gold Mendocino, Kona Coal, and Kone White.
Sew the strips in the order of print, dark strip, and the white strip for a 6.5″ wide finished strip.
The seams should be pressed toward the dark middle strip. Both strips are 22″ long.
Starch is your friend, and it will help keep the super skinny dark strip in the middle nice and neat while cutting and piecing. I like Best Press and I’m not afraid to use it!
You should cut 12 blades from each strip, and 24 blades from two strips of white that is 6.5″ x 22″.
Sew a white blade to a patterned blade together. Press the seams toward the patterned piece. If I had a dark background, I would press the seams toward the solid blade to help keep the bulk tame.
Keep the sets with the white on toward the center together and the white toward the outside together. Alternate a medium set with a dark set until you have them sewed together. Butting the seams will help to keep everything aligned!
Square up the circles by picking three blades, and cut straight across. Match the 45 degree mark on the cut and line up the next seam. Ideally the 45 degree mark will line up perfectly. Cut the next three blades. Continue around until you have a perfect octagon! The block should measure 14.5″ x 14.5″ across the middles.
Use a 5″ square cut on the diagonal and sew on opposite sides to square up the block. Finish squaring up the block. Applique an octagon into the middle to finish them off.
I am the Queen Bee for Hive 3 at the Stash Bee for the month of August! This is my choice for blocks. They are fairly simply and I was able to complete them in an evening and follow morning! Not too shabby. Although I think a EZ Dresden ruler will be in my future!
